Waterproofing Membrane TM-MEMBRANE (-5°C) C 2000 Modified APP Polymer
High-performance APP polymer modified bitumen waterproofing membrane with fiberglass reinforcement. Ideal for foundations, roofs, terraces, and wet areas.
Product Structure and Composition
The product delivers superior performance thanks to its complex multi-layer structure:
- POLYETHYLENE TOP COATING
- SUPERIOR PERFORMANCE APP POLYMER MODIFIED BITUMEN
- FIBERGLASS REINFORCEMENT CORE SHEET
- SUPERIOR PERFORMANCE APP POLYMER MODIFIED BITUMEN
- POLYETHYLENE BOTTOM COATING
Product Description
A waterproofing membrane sheet consisting of a fiberglass reinforcement core modified with APP (Atactic Polypropylene) and wrapped on both sides with a polyethylene film, designated as TM - MEMBRANE (-5°C). It is widely used across the climatic conditions of our country.
Scope of Application
- Water reservoirs
- Pond basins, decorative pools
- Kitchens, bathrooms, toilets
- Parking lots
- Terraces and roofs
- Balconies
- Flower beds, garden terraces
- Concrete gutters, streams, and concealed valleys
- Retaining and basement walls
- Wastewater treatment plants
- Pressurized underground water protection
Product Features
- Flexibility and Durability: Flexible, long-lasting, and easily applied to various surface types.
- High Strength: Features high tensile and tear strength resistance.
- Aggressive Environment Resistance: Resistant to aggressive impacts and chemicals that may occur within the soil.
- Easy Installation on Details: Easily applied to complex details such as expansion joints, chimney edges, and parapet flashings.
Surface Preparation
- Primer Application: The substrate area must be thoroughly cleaned of loose particles, oil, and other chemical substances.
- Expert Recommendation: For a sound application, it is highly recommended to use TM MASTIKA bituminous mastic as a primer on the application surface.
Storage Conditions
- Vertical Storage: Rolls must strictly be stored in an upright, vertical position.
- Sun Protection: Rolls must be protected from direct ultraviolet (UV) rays.
- Important Note: The areas subject to stacking/laying must not be covered or protected by heavy upholstery.
Application (Installation Technology)
- Side Overlaps: The waterproofing material must maintain a longitudinal overlap of at least 10 cm at the joints.
- End Overlaps: The end of the roll must feature an overlap of at least 15 cm.
- Fixing Method: The material is completely bonded to the underlying waterproofing surface using a propane gas flame (torch-on application).